If you’re new to pressure washing, or even if you’ve been doing it for a while, you might be making some common mistakes. In this article, we’ll go over five of the most common Giraffe tools pressure washer mistakes and how to avoid them.
1.Not preparing the surface before pressure washing
If you don’t take the time to properly prep the surface before pressure washing, you could end up doing more harm than good. skip this crucial step, you run the risk of damaging your siding, deck, or other surfaces.
To avoid any accidental damage, be sure to clear the area of any loose debris and remove any furniture or other items that might be in the way. Once the area is clear, you can start prepping the surface for pressure washing by lightly sanding down any rough areas. This will help create a smooth surface for the water and detergent to evenly distribute across.
If you’re still not sure how to properly prep your surface, consult with a professional pressure washing company before getting started.
2.Using too much pressure
One of the most common mistakes people make when pressure washing is using too much pressure. This can damage surfaces, strip paint, and cause other problems. Start with a lower pressure setting and increase it as needed. Always test on a small area first to be sure you’re not going to cause any damage.So be sure to hold the nozzle too close to the surface.You might think that holding the nozzle closer to the surface will result in a cleaner area, but this couldn’t be further from the truth. When you hold the nozzle too close, you can actually cause more damage to the surface. The high-pressure stream of water can etch into soft surfaces like wood or composite material, and it can also strip away paint or protective coatings.
3.Hold the nozzle at least a foot away from the surface you’re cleaning
If you apply too much pressure when pressure washing, you could end up causing serious damage. The high-pressure stream of water can easily gouge soft surfaces like wood or composite material, and it can also strip away paint or protective coatings. So, be sure to use the lowest setting that will still get the job done. And not using the right nozzle.Not all nozzles are created equal, and using the wrong one can cause serious damage. The high-pressure stream of water can easily gouge soft surfaces like wood or composite material, and it can also strip away paint or protective coatings. So, be sure to use a nozzle that is designed for the type of surface you’re cleaning.
4.Moving the nozzle in one direction only
Moving the nozzle in one direction only is a pressure washing mistake that can cause streaks or missed spots. Instead, move the nozzle back and forth as you clean to ensure even coverage.
Another pressure washing mistake is using too much pressure. This can damage delicate surfaces like painted walls or windows. Start with a lower setting and increase the pressure as needed to
5.Not rinsing the surface afterwards
If you don’t rinse the surface afterwards, all the dirt and grime that you just removed will dry on the surface and will be harder to remove next time. Plus, it can leave streaks or stains. Always rinse the surface with clean water after pressure washing.
Conclusion:
If you’re pressure washing your home or business and not getting the results you want, you might be making one of these five common mistakes. By avoiding these errors, you can achieve professional-looking results that will improve your curb appeal and make your property look its best.
